 |
The
Center Steer Rack & Pinion is another alternative for steering
your 28'-34' Street Rod. This is a conventional looking rack and pinion
that mounts to the U bolts of the front cross member. |
| This
is truly a unique rack & pinion, it is a conventional rack that is
super narrow, allowing the long tie rod tubes to pivot with the solid
axle suspension so there is very little bump steer! |
| The benefits
steering wise are comparable to the benefits of the traditional Cross
Steer Rack & Pinion. There is more positive steering feel, no play
or tight spots that are associated with steering boxes. In addition, due
to the mechanical advantage of the Rack and Pinion, there is a significant
reduction in the steering effort, even at low speeds. |
| The Center
Steer cleans up the look of your front suspension, doing away with the
cross steering setup of a long tie rod tube and a drag link. The Center
Steer comes with its own unique chromed mounting bracket, the pinion is
then located in the center of the axle. Check it out, the center steer
rack is the unit to make your car steer great and be a unique vehicle. |
Center
Steer Installed
Ball Center width is 13.75" |
 |
