Lizard Skin® Ceramic Insulation Coating
| A
premium spray-on insulation for all cars and trucks, street rods and customs,
race cars, buses, refrigerated trailers, RVs, motorhomes, experimental
aircraft, and high end audio installations - wherever heat and noise are
a problem. LizardSkin® Ceramic Insulation formula is an advanced, water-based composition of high-grade acrylic binders with air-filled insulating/reflective and sound-absorbing particles. |
 |
Environmentally friendly, water-based |
|
Class A fire-rated |
|
|
No respirator needed; dust mask/protective eyewear recommended |
|
|
Spay application only; brush for small areas or touch up |
|
|
Can cover hard to reach places like inner door panels |
|
|
Cleans up with soap & water |
|
|
Each 2-gallon container covers 46-50 sq. feet @ .040” |
| Proven aerospace technology enables LizardSkin® Ceramic Insulation to: | |
|
Reduce engine and solar heat transfer by 25-30 degrees or more |
|
|
Reduce noise by 10-12 decibels or more |
|
|
Protect surfaces from moisture and corrosion |
|
|
Withstand temperatures to 500° F. (260° C.) |
|
| Part No. | Description / Application | RJay's | Buy It! |
| LIZ50100 | Lizard Skin Ceramic Sound Insulation (2 gal.) | $189.00 |
Lizard Skin® Sound Control Formula
| LizardSkin® SC formula is an advanced, water-based composition of high-grade acrylic binders with sound-damping particles. Proven sound damping technology enables LizardSkin® SC to dramatically reduce noise when properly applied. It also protects surfaces from moisture and corrosion and can withstand temperatures to 300° F. (149° C.) LizardSkin® SC is used by custom car, street rod, truck builders and RV owners who want to reduce unwanted noise and/or enhance the sound of their high end audio systems. It is best applied by special spray gun to a clean and dry primed or painted rust-free steel. Typical applications include firewalls, floor pan, transmission tunnels, doors, hoods, trunk lids, under headliners, inside fenders, panel van walls and other areas that generate vibration and noise. For maximum acoustic performance, coat entire interior surface and the floor inside and out. |
 |
Dramatically reduces noise and vibration |
|
Protect surfaces from moisture and corrosion |
|
|
Withstand temperatures to 300° F. (149ª C.) |
|
|
Class A Fire-rated |
|
|
Can cover hard to reach places like inner door panels |
|
|
A 2- gallon container covers approximately 100 sq. ft. at 20/1000's (Max thickness 40/1000's for maximum effectiveness) |
| Part No. | Description / Application | RJay's | Buy It! |
| LIZ50115 | Lizard Skin Sound Control Formula (2 gal.) | $169.00 |
Lizard Skin® SuperPro Spray Gun Kit
| The SuperPro spray gun kit provides exactly what’s needed for professionals and hobbyists to properly apply amazing LizardSkin® coatings Typical spray guns used for paint application are simply not engineered to handle the higher density of these high technology coatings. To help facilitate this process for builders and manufacturers, LizardSkin LLC is pleased to offer the proven quality of the SuperPro spray gun. |
 |
Professional quality spray gun designed to handle the high density and viscosity of LizardSkin® Ceramic Insulation and LizardSkin® SC – Sound Control Formula with extra nozzles and flexible spray wand for hard to reach areas |
|
Included one-quart cup can be used for application to small areas |
|
|
One stir paddle (attaches to drill) |
|
|
One 48” siphon hose (5/8 Inch ID Thick Wall Rubber) |
|
|
One 12-inch siphon tube (1/2 Inch ID, 5/8 Inch OD Metal Conduit) |
|
|
Two hose clamps, one threaded hose barb |
|
|
LizardSkin® coatings should not be applied when abient temperature is below 70 degrees |
| Part No. | Description / Application | RJay's | Buy It! |
| LIZ50125 | Lizard Skin Spray Gun Kit | $140.00 |
 |
||||||||||
7079
Hwy ZZ / Cuba, MO 65453
All Materials Copyright © 1999-2007 RJay's Performance Center, LLC Reproduction of any material prohibited without written permission. Contact website owner: RJay's Webmaster |
| |
| top |