 |
 |
More spark energy with voltage to burn. | |||||||||||||
While
it's the perfect coil to go with the PerTronix Ignitor breakerless ignition,
our new 40,000 volt Flame-Thrower can benefit virtually any distributor
type induction system. For one thing, the higher voltage allows larger
spark plug gaps for added power, smoother response and better fuel economy. Choose from chrome or OEM black, they're oil filled for better cooling and voltage insulation; or get the epoxy version of the Flame-Thrower when extreme vibration is a factor. |
||||||||||||||
|
| Part No. | Description / Application | RJay's Price | Buy It! |
| PTXD40001 | Chrome Oil Filled, 1.5 Ohm | $29.95 | |
| PTXD40011 | Black Oil Filled, 1.5 Ohm | $26.95 | |
| PTXD40111 | Black Epoxy, 1.5 Ohm | $31.95 | |
| PTXD40501 | Chrome Oil Filled, 3.0 Ohm | $29.95 | |
| PTXD40511 | Black Oil Filled, 3.0 Ohm | $26.95 | |
| PTXD40611 | Black Epoxy, 3.0 Ohm | $29.95 |
 |
 |
Flame-Thrower II Super Low Resistant Coils |
|
PerTronix
has announced a new addition to their line up of Flame-Thrower coils.
A super low resistant (0.6 ohm) 45,000 volt rated application is now
available in chrome or OEM black, oil filled for better cooling and
voltage insulation, or a black epoxy version when extreme vibration
is a factor. While it’s the perfect coil to go with the new Ignitor II breakerless ignition, their new coil can benefit virtually any distributor ignition system because the lower resistance and improved turns ratio produces the higher voltage needed to run larger spark plug gaps for added power and better fuel economy. The coil is also compatible with most capacitive discharge boxes including the popular MSD 6 or 7 series and Pertronix Second Strike ignition. Flame-Thrower II coils are 50 state legal and come with California Air Resources Board E.O. #D-57-10. NOTE: NOT FOR USE WITH (ORIGINAL) IGNITOR IGNTION! |
| Part No. | Description / Application | RJay's Price | Buy It! |
| PTXD45001 | Chrome Oil Filled, 0.6 Ohm | $39.95 | |
| PTXD45011 | Black Oil Filled, 0.6 Ohm | $31.49 | |
| PTXD45111 | Black Epoxy, 0.6 Ohm | $42.89 |
 |
 |
PerTronix
announces the availability of their Flame-Thrower® replacement HEI
50,000-volt coils for most GM applications using either the red/white
or red/yellow wire leads. According to PerTronix, their coils feature an optimized windings design to maximize spark gap current and available voltage and when teamed with a Flame-Thrower® module delivers twice the energy across the spark gap (during a one millisecond burn time) compared to the OEM HEI. |
| Part No. | Description / Application | RJay's Price | Buy It! |
| PTXD3000 | Chevrolet 90° V6, Most V8, 0.50 Ohm | $39.88 | |
| PTXD3001 | Chevrolet Corvette (81-91), 0.50 Ohm | $39.88 | |
| PTXD3000 | Cadillac V8, 0.50 Ohm | $39.88 | |
| PTXD3001 | Buick V6 & V8, 0.50 Ohm | $39.88 | |
| PTXD3001 | Oldsmobile V8, Pontiac V8, 0.50 Ohm | $39.88 | |
| PTXD3070 | Race Only, 0.40 Ohm | $59.88 |
| COIL SELECTION GUIDE |
|
|
 |
|
|
 |
 |
||||||||||
7079
Hwy ZZ / Cuba, MO 65453
All Materials Copyright © 1999-2007 RJay's Performance Center, LLC Reproduction of any material prohibited without written permission. Contact website owner: RJay's Webmaster |
| |
| top |