Mustang II Front End Components

Spindles

	Heidt's Mustang II 2" Drop Spindles
		Uses all stock rotors, bearings, calipers making it easy to install. Retains absolutely stock factory geometry. NSRA product of the year. Sold per pair.

Part No.

Description / Application

RJay's

Buy It!

HEISP-101

Heidt's Mustang II 2" Drop Spindles

$319.00

HEIMP-028

Heidt's Mustang II Stock Height Spindles

$239.00

RJay's Mustang II Stock / 2" Drop Spindles
These high quality forged, original dimension stock-height and 2" drop spindles are ready to bolt on. Sold per pair.

Part No.

Description / Application

RJay's

Buy It!

IWHIW4043

Mustang II Stock Height Spindles

$199.00

IWHIW4043D2

Mustang II 2" Drop Spindles

$199.00

Upper A-Arms

Stainless Arms Shown

Heidt's Tubular Upper A-Arms
Tubular Upper A-Arms are the ultimate in looks. Direct replacement for stock upper A-arms, providing more clearance for stock sheet metal. All welds are heli-arc welded for maximum strength and appearance. Fits Heidt's and most other IFS kits. Arms arrive fully assembled, ready to install, including ball joints, bushing and cross shafts. D-Arms are designed to fit factory crossmembers or kits with large spring towers. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEICA-101

Heidt's Tubular Mustang II Upper A-Arms

Plain

$265.00

HEICA-101SS

Heidt's Tubular Mustang II Upper A-Arms

Stainless

$435.00

HEICA-101N

Heidt's Tubular MII Upper A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Lowers)

Plain

$265.00

HEICA-101SSN

Heidt's Tubular MII Upper A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Lowers)

Stainless

$435.00

Heidt's Econo Upper A-Arms
Heidt's Hot Rod Shop has designed cost conscious control arms for the builder who does not require the high tech look of tubular control arms but wants the ease of installing custom full A-Arms on his Mustang II I.F.S. The upper arms are a direct replacement for factory arms. Formed from 7 gauge steel, the same as their Mustang II crossmembers, they are super strong. They come complete with the ball joints and bushings installed, and with all the hardware and spacers ready to install.
Sold per pair.

Part No.

Description / Application

RJay's

Buy It!

HEICA-101E

Heidt's Econo Mustang II Upper A-Arms

$195.00

RJay's Mustang II Upper A-Arms
New upper "A" Arms include new cross shaft, new control arm bushings and new upper ball joint complete with boot, castle nut and cotter pin.
These arms are direct replacements for all Mustang II suspensions from '74-'78 manual or power steering. Sold each.

Part No.

Description / Application

RJay's

Buy It!

IWHIW40410

Mustang II Upper A-Arm (ea)

$79.95

RJay's Mustang II Top & Bottom Sets
SPECIALLY PRICED Kits include new lower control arms and upper A-arms.
These kits are direct replacements for all Mustang II suspensions from '74-'78 manual or power steering. These lower arms require use of strut rod.

Part No.

Description / Application

RJay's

Buy It!

IWH-M2SET

Mustang II Upper & Lower Arm Set

$269.95

Lower A-Arms

Stainless Arms Shown

Heidt's Tubular Lower A-Arms
Full A-Arm Lower Control Arm uses no strut rod! Triangulated A-Arm design, similar to factory G.M. control arms, provides stability and strength within the arm itself. All welds are Heli-arc welded for ultimate strength and appearance. Comes complete, ready to install with mounting bolts, spacers, shock bolts, nuts, installed ball joints and bushings.Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEICA-103

Heidt's Tubular Mustang II Lower A-Arms

Plain

$375.00

HEICA-103SS

Heidt's Tubular Mustang II Lower A-Arms

Stainless

$545.00

HEICA-103N

Heidt's Tubular MII Lower A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Uppers)

Plain

$375.00

HEICA-103SSN

Heidt's Tubular MII Lower A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Uppers)

Stainless

$545.00

Stainless Arms Shown

Heidt's Coil-Over Lower A-Arms
Now available - Lower Tubular Control Arms designed exclusively for coil-overs. These arms will accept any standard aftermarket coil-over shock. Available in mild steel or polished stainless steel for the ultimate in appearance. Ball joints and bushings installed. All welds heli-arc welded for maximum strength and appearance. Fits all Heidt's Mustang II IFS kits as well as most other after market Mustang II kits. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEICA-103M

Heidt's Coil-Over MII Lower A-Arms

Plain

$375.00

HEICA-103SSM

Heidt's Coil-Over MII Lower A-Arms

Stainless

$545.00

HEICA-103NM

Heidt's Coil-Over MII Lower A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Uppers)

Plain

$375.00

HEICA-103SSNM

Heidt's Coil-Over MII Lower A-Arms -
Narrowed 5/8" for Extra Tire Clearance
(Must be Used with Matching Uppers)

Stainless

$545.00

Heidt's Econo Lower A-Arms
Heidt's Hot Rod Shop has designed cost conscious control arms for the builder who does not require the high tech look of tubular control arms but wants the ease of installing custom full A-Arms on his Mustang II I.F.S. The lower A-Arms have the same wide triangulated spread that Heidt's full tubular lower A-Arms do, so they need no strut rods. Formed from 7 gauge steel, the same as their Mustang II crossmembers, they are super strong. They come complete with the ball joints and bushings installed, and with all the hardware and spacers ready to install.
Sold per pair.

Part No.

Description / Application

RJay's

Buy It!

HEICA-103E

Heidt's Econo Mustang II Lower A-Arms

$255.00

Heidt's Air Spring Conversion Kit
If you already have Mustang II suspension in your car, you can purchase an Air Spring Conversion Kit. This includes all the air spring components, which are the air springs, along with new lower air spring control arms, shocks, upper shock mounts, and upper air spring adapters. Please note that these adapters and control arms incorporate Heidt's exclusive bottom-out snubbers, which are the most important part of the conversion.

Part No.

Description / Application

RJay's

Buy It!

HEIAIRCON

Air Ride Conversion Kit - Plain Lower Arms

$660.00

HEIAIRCONSS

Air Ride Conversion Kit - Stainless Lower Arms

$810.00

Lower Control Arms

Stainless Arms Shown

Heidt's Tubular Lower Control Arms
These Tubular Lower Control Arms are direct replacement for factory lower control arms. Uses stock Mustang Il/Pinto shocks, springs and strut rods. Arms arrive fully assembled ready to install, with lower shock bolts and nuts. Ball joints and bushings installed. All welds heli-arc welded for maximum strength and appearance. Fits all Heidt's Mustang II IFS kits as well as most other after market Mustang II kits. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEICA-102

Heidt's Tubular MII Lower Control Arms

Plain

$299.00

HEICA-102SS

Heidt's Tubular MII Lower Control Arms

Stainless

$435.00

Stainless Arms Shown

Heidt's Coil-Over Lower Control Arms
Now available - Lower Tubular Control Arms designed exclusively for coil-overs. These arms will accept any standard aftermarket coil-over shock. Available in mild steel or polished stainless steel for the ultimate in appearance. Ball joints and bushings installed. All welds heli-arc welded for maximum strength and appearance. Fits all Heidt's Mustang II IFS kits as well as most other after market Mustang II kits. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEICA-102M

Heidt's Coil-Over Lower Control Arms

Plain

$295.00

HEICA-102SSM

Heidt's Coil-Over Lower Control Arms

Stainless

$495.00

RJay's Mustang II Lower Control Arms
New lower control arms have new bushing and new lower ball joint installed.
These arms are direct replacements for all Mustang II suspensions from '74-'78 manual or power steering. These lower arms require use of strut rod. Sold each.

Part No.

Description / Application

RJay's

Buy It!

IWHIW40420

Mustang II Lower Control Arm (ea)

$69.95

Part No.

Description / Application

RJay's

Buy It!

IWH-M2SET

Mustang II Upper & Lower Arm Set

$269.95

RJay's Mustang II Strut Rods
New reproduction stock type strut rods come with new bolts for installation onto lower control arm. (Strut rod bushing kit not included)

Strut rod bushing kit includes two complete sets with washers to service both sides (2 strut rods).

Part No.

Description / Application

RJay's

Buy It!

IWHIW4044

Mustang II Strut Rod (ea)

$26.95

IWHIW4044WB

Mustang II Strut Rod Busing Kit (both sides)

$19.95

Stainless Strut Rods Shown	Heidt's Tubular Strut Rod Kit Universal Kit - fits any Mustang installation. You only have to notch the struts mount plates to meet your frame rail. Kit comes complete with bushings and mounting hardware.
	- Plates provided over size to allow for custom fit. - Rubber pivot bushing gives freer-moving non-binding suspension. - Hardened Studs Installed.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEISR-101

Heidt's Tubular Strut Rod Kit

Plain

$125.00

HEISR-101SS

Heidt's Tubular Strut Rod Kit

Stainless

$195.00

Springs & Shocks

Heidt's Superide Billet Mustang II Coil-Overs
HEIDT'S Superide Billet Coil-Over Shocks for Mustang II IFS provide the highest quality ride characteristics for your Mustang II front end. They are designed for high performance comfort, with increased travel for better ride characteristics. Aluminum body have a bright anodized finish. 5/8" centerless ground solid piston rod, 10 position rebound valving adjuster. Spring height adjustment is by threaded spring seat and locking ring. Available in street or drag racing for maximum weight transfer. Chrome springs are standard! Sold per pair.

HEIDT'S Superide Billet Coil-Over Shock Assemblies are available with plain or polished shock bodies. Springs are chromed on all billet coil-overs. Spring height adjustment is by a threaded spring seat and locking ring. Shock rate is adjustable using 10 position adjustment knob.

Part No.

Description / Application

Springs

RJay's

Buy It!

HEIMP-050

Superide Billet Mustang II Coil-Over Shocks
with Chrome Springs

$495.00

HEIMP-050-P

Superide Billet Mustang II Coil-Over Shocks
with Chrome Springs / Polished Shocks

$595.00

Heidt's Chrome Steel Coil-Over Shocks
Fits stock Mustang II lower arms and Heidt's Tubular Coil-Over Lower Arms, provides the ultimate in hi-tech appearance for the Mustang II IFS. Provides adjustable ride height as well as spring rates. Show chrome plated (steel) shocks, with aluminum ride height adjusters, spherical lower ends and show chrome springs included. Select Spring Rate Below. Sold per pair.

Part No.

Description / Application

Springs

RJay's

Buy It!

HEIMP-040

Mustang II Coil-Over Shocks w/Chrome Springs

$425.00

Heidt's Spanner Wrench & Thrust Bearing Kits
Spanner wrenchis a necessity when adjusting coil-overs! Works with Heidt's and other coil-over shocks. Thrust Bearings sit between springs and threaded adjuster, making adjustment a breeze!

Part No.

Description / Application

RJay's

Buy It!

HEITA-001

Spanner Wrench

$15.00

HEICQ-010

Thrust Bearing Kit (for 2 springs)

$25.00

Heidt's Coil Springs
Replacement Mustang II Coil Springs.
Select Spring Rate Below.
Sold per pair.

Part No.

Description / Application

Springs

RJay's

Buy It!

HEIMP-007-___

Mustang II Coil Springs (pr)

$99.00

Pro Shocks
Chrome MII Shocks
Chrome MII Coil Springs
Replacement Mustang II Shocks & Coil Springs.
Select Spring Rate Below.
Sold EACH.

Part No.

Description / Application

Springs

RJay's

Buy It!

PROSM400

Mustang II Chrome Shock (EACH)

N/A

$50.00

PRO11/___

Mustang II Chrome Coil Spring (EACH)

$59.00

Hardware & Small Parts

Heidt's Upper A-Arm Bolt Kit
Fits stock and aftermarket Mustang II Upper A-Arms, including tubular style.
Sold in a set of 4, enough for both upper arms.

Part No.

Description / Application

RJay's

Buy It!

HEIMP001-A

Mustang II Upper A-Arm Bolt Kit

$19.95

Heidt's Upper Spring Cushions
Rubber Spring Cushions. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEIMP-006

Mustang II Upper Spring Cushions (pr)

Natural

$15.95

Heidt's Spindle Nut Kit
Enough for both spindles.

Part No.

Description / Application

RJay's

Buy It!

HEIHK-006

Mustang II Spindle Nut Kit

$15.95

Heidt's Tie Rod Ends
Mustang II Tie Rod Ends available in plain finish or polished stainless steel.
Sold per each.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEIMP-017

Mustang II Tie Rod End

Plain

$19.95

HEIMP-017SS

Mustang II Tie Rod End

Polished Stainless

$59.00

Heidt's Rack & Pinion Extension Kit
Extends Rack & Pinion 4" Total.
Use with Heidt's kits PX-104, 104-E, 105, 105-E, CX-308, 308E, KX-102, 102-E

Part No.

Description / Application

RJay's

Buy It!

HEIMP-037-4

Rack & Pinion Extension Kit - Manual Rack

$39.95

HEIMP-039-4

Rack & Pinion Extension Kit - Power Rack

$39.95

Heidt's Ball Joint Caps
Cover ugly ball joint tops with polished stainless ball joint caps. Designed to fit all Heidt's Mustang tubular arms as well as most other manufacturers tube arms. Sold per pair.

Part No.

Description / Application

Finish

RJay's

Buy It!

HEIMP-035

Heidt's Ball Joint Caps

Polished

$29.50

Related Parts You May Want to Check Out:

Heidt's MII Packages Including Crossmember
Free Shipping!

Heidt's Mustang II Crossmember Kits

Heidt's MII Suspension Components Packages

Heidt's Early Mustang / Mustang II Kits

RJay's Mustang II Brake Kits & Components

Wilwood Mustang II Disc Brake Kits

Flaming River Mustang II Rack & Pinions

7079 Hwy ZZ / Cuba, MO 65453

Monday-Friday 9:00am to 5:00pm CST / Saturday 9:00am to 12:00pm CST

Contact RJay's Speed Shop

Phones:	e-mail:
Toll Free: 1-866-885-9106	Tech/Parts Questions
Phone: 1-573-885-9106	Order Inquiries
Fax: 573-885-6456	RJay hiself

top