| Steering Shafts by Flaming River |
 |
There are two types of intermediate shaft systems: DD or Splined. Either
shafting is ideal for your steering system, although splined shafts
allow more precise adjustments. DD shafts can only be phased 180°
while splined shafts can be rotated fractionally. The advantage to DD,
however, is that it can be cut to any length eliminating the need to
premeasure. You will need to choose which shafting you will be using
prior to ordering the universal joints, since one side accommodates
the shaft. |
| Stainless or Steel DD Shafts by Flaming River |
 |
DD shafts are 3/4" round with two flats, and can be easily cut
to desired length. Drill two indents for set screws, and use red threadlocker
when tightening set screws. Stainless 304 shafts are available with
or without polishing. |
| Part No. | Description / Application | RJay's | Buy It! |
| FR1850 | 18" DD Shaft - Carbon Steel | $29.00 | |
| FR1850SS | 18" DD Shaft - Stainless Steel 304 | $49.00 | |
| FR1850SSPL | 18" DD Shaft - Polished Stainless Steel 304 | $69.00 | |
| FR1850-22SS | 22" DD Shaft - Stainless Steel 304 | $59.00 | |
| FR1850-22SSPL | 22" DD Shaft - Polished Stainless Steel 304 | $79.00 | |
| FR1851 | 36" DD Shaft - Carbon Steel | $49.00 | |
| FR1851SS | 36" DD Shaft - Stainless Steel 304 | $79.00 | |
| FR1851SSPL | 36" DD Shaft - Polished Stainless Steel 304 | $89.00 |
| Allstar Brand DD SHAFT - Good Quality, a Little Less Money! |
| Part No. | Description / Application | RJay's | Buy It! |
| ALL52175 | 24" DD Shaft - Carbon Steel | $20.00 | |
| ALL52176 | 30" DD Shaft - Carbon Steel | $25.00 | |
| ALL52177 | 36" DD Shaft - Carbon Steel | $30.00 |
| Splined Shafts by Flaming River |
 |
Splined Shafts work the same as DD shafts, but the 3/4"-36 spline
shafts allow a more precise adjustment. Shafts are manufactured in 2"
increments, from 4" to 36" overall lengths. Splined 2"
on each end allowing for 2" of total trim (up to 1" on either
end). Shafts use a pre-ground alloy steel for strength and cosmetics.
Available in electroless nickel plating for corrosion resistance. Also
available in polished stainless steel. |
| Description / Application | RJay's | Buy It! | |
| 4" to 16" Alloy Steel Shaft | |||
| 4" to 16" Nickel Plated Alloy Steel Shaft | |||
| 4" to 16" Polished Stainless Steel Shaft | |||
| 18" to 36" Alloy Steel Shaft | |||
| 18" to 36" Nickel Plated Alloy Steel Shaft | |||
| 18" to 36" Polished Stainless Steel Shaft | |||
| Support Bearings by Flaming River |
 |
Support Bearing Whenever a steering system contains either three joints, a double universal joint or vibration dampener, a support bearing is necessary. The support bearing can be used with either splined or DD shafts. |
| Part No. | Description / Application | RJay's | Buy It! |
| FLAFR1810 | Support Bearing - Zinc Plated (3/4") | $27.00 | |
| FLAFR1811 | Support Bearing - Stainless (3/4") | $65.00 | |
| FLAFR1811PL | Support Bearing - Polished Stainless (3/4") | $89.00 |
 |
Frame Mount Support Bearing Kit This frame bracket allows for easy mounting of support bearing. Slotted for adjustability. Available angled or straight. |
| Part No. | Description / Application | RJay's | Buy It! |
| FLAFR1810KA | Angled Bracket with Support Bearing | $49.95 | |
| FLAFR1810KAC | Angled Bracket Chrome with Support Bearing | $84.95 | |
| FLAFR1810KS | Straight Bracket with Support Bearing | $49.95 | |
| FLAFR1810KSC | Straight Bracket Chrome with Support Bearing | $84.95 |
 |
Polished Billet Support Bearing A show quality billet support bearing mounts with two 1/4"-20 fasteners. Polished aluminum 2-1/2" length to fit 3/4" shaft diameter. |
| Part No. | Description / Application | RJay's | Buy It! |
| FLAFR1812BI | Polished Billet Support Bearing (3/4") | $96.95 |
 |
||||||||||
7079
Hwy ZZ / Cuba, MO 65453
All Materials Copyright © 1999-2008 RJay's Performance Center, LLC Reproduction of any material prohibited without written permission. Contact website owner: RJay's Webmaster |
| |
| top |