| |
Highway
22 Modular Panel System Features:
|
 |
 |
Modular wiring system |
|
22 power circuits
supported through 15 fuses and 1 circuit breaker |
|
Battery and accessory
power tap studs provided for system expansion |
|
Panel
protected with a 175 amp Mega-Fuse junction block with a 8 gauge panel
feed wire |
|
Nylon
mechanically secured panel containing secondary push-back locks, has a
7-1/2” x 4-1/2” footprint, 3-3/8”in height, and mounted
on a (G10) non conductive epoxy base |
|
All power
buss bars are constructed of 6 gauge copper |
|
All wires
are constructed from heat resistant (-60F- +275F) GXL heavy-wall wire
with laser printed circuit identification every 2 inches |
|
GM color
coded wires for ease of installation |
|
All power
circuits wires are 12 gauge constructed |
|
New front
loaded vibration proof self- locking (Hooke’s Law) screw down terminal
connection |
|
Dedicated
battery and ignition circuits for electronic fuel injection (EFI) |
|
Kit contains
3 relays (Horn, Turn Signal & 40 amp Electric Fan or Fuel Pump) |
|
Turn
signal and hazard flasher circuits provided |
|
8 gauge
alternator feed wire provided |
|
The kit
is set-up for a GM “SI” internally regulated alternator or
GM 1-wire |
|
Alternator
diode is also provided |
|
Kit includes
3 (In-dash Ignition, Headlight & Alum. Knob and Floor Dimmer) switches |
|
GM in-column
ignition switch connectors provided, along with 3-7/8” GM steering
column connectors with male and female terminals |
|
Plugs
directly most 69-74 GM column and most after market steering columns or
use the terminals and connector provided to mate to any column |
|
Spare
circuits available (for power windows, locks, cruise, etc.) |
|
Engine
compartment (oil pressure, water temp, tach, starter, neutral safety,
brake switch, ignition switch, distributor (GM HEI or Points), coil, main
power and alternator) |
|
Chassis
wiring (fuel pump, electric fan, headlights, running lights, brake lights,
3rd brake lt., directional, license plate, radio, heat & AC, and wipers) |
|
Full
color schematic of overall vehicle wiring along with individual harness
subkit instructions for trouble-free installation. |
