| Performer® Manifolds (idle to 5500 rpm) |
 |
Performer
manifolds are dual-plane, low-rise intake manifolds with a 180°
firing order and patented runner design that you won't find in other
brands. This patented design greatly improves torque over a wide rpm
range for excellent throttle response, especially off-idle through the
mid-range. Throttle Performers are ideal for passenger cars, trucks,
4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available
for most domestic V8 and some V6 engines. Most Performer intakes are
50-state street legal, when used with the correct carburetor and in
the correct application. Check the individual listings for detailed
information. |
| Ford 260-289-302 V8 |
PERFORMER 289 (idle-5500 rpm) Designed for street 260-289-302 c.i.d. Ford V8s without EGR. #2121 is stock replacement/street legal part for 289 and 302 V8s with OEM 4V carb.; 1966-72 (1973 non-CA); except stock equipped EGR. Will not fit Boss 302 or 255 c.i.d. V8s. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. Available with standard finish, polished or with PermaStar or new EnduraShine finish for a look you've got to see to believe, see Optional Finishes. |
 |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 2121 | Performer 289 (non-EGR) | $169.99 | |
| 21211 | Polished Performer 289 (non-EGR) | $279.99 | |
| 21212 | Performer 289 with PermaStar Finish (non-EGR) | $274.99 | |
| 21214 | Performer 289 with EnduraShine Finish (non-EGR) | $299.99 |
| Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1490 or #1844 & #1845 |
 Installation
Notes: Recommended intake gasket: Edelbrock #7220. Manifold height.: A-3.50",
B-4.75", see A/B Measurements. Port exit dimensions: 1.09" x
1.84". |
| Ford 260-289-302 V8 |
PERFORMER
302 (idle-5500 rpm) Designed for carbureted 302 c.i.d. Ford V8s with EGR. #3723 is stock replacement/street legal part for 302 2V V8s; 1972-85. Comes with a 2V EGR plate allowing the use of the stock 2V carb and EGR valve. #3721 is stock replacement/street legal part for 302 4-V V8s; 1983-85. Replaces the stock 4V EGR manifold using the stock 4V adapter. Both manifolds can be adapted for 4V use by using our #8053 4V EGR plate and the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E spacer may be substituted for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford spacer). For 4V off-highway non-EGR applications, use our #8714 spacer. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 3721 | Performer 302 4-V (EGR) | $207.99 | |
| 3723 | Performer 302 2-V (EGR) | $299.99 |
| Carburetor Recommendations: #3721: OEM 4-bbl. use our #8011 (if necessary) #3723: OEM 2-bbl. #3723 can be used for off-road applications with Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (non-EGR, see Carbs & Accessories) use adapter #8714. For auto. trans. use our #1483 & #1490 or #1844 & #1845 |
| Installation Notes: Recommended intake gasket: Edelbrock #7220. #3721 includes gaskets & 4-bbl. plate #8017 for sealing of OEM EGR plate & carb. Replacement EGR plate gaskets for #3723: #3896 & #3897. Manifold height: #3721 A-3.13", B-4.31" (without EGR plates installed). #3723 A-4.00", B-5.19 (with EGR plates installed), see A/B Measurements. Port exit dimensions: .90" x 1.90". |
| Ford 351 Windsor V8 |
| PERFORMER
351-W EGR (idle-5500 rpm) Designed for street Ford 351-Windsors with EGR. #3781 is stock replacement/street legal part for 351-W 2V V8s; 1972-87 and works with either the OEM 2V carb or an aftermarket EGR 4V carb for off-road by using Edelbrock #8053 4V EGR plate and compatible EGR valve and gasket. #3783 is stock replacement/street legal part for 351-W 4V H.O. V8s; 1984-86. Performer 351-W #3783 includes provision for EFE valve on H.O. engines. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see note below. |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 3781 | Performer 351-W 2V (EGR, 4V off-road) | $284.99 | |
| 3783 | Performer 351-W 4V H.O., (EGR,1984-86) | $249.99 |
| Carburetor Recommendations: #3781: OEM 2V carburetor #3783: OEM 4V carburetor |
| Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Replacement EGR plate gaskets: #3896 & #3897. Choke block-off cover plate #8981 comes with intake manifolds. Manifold ht: A-4.00", B-5.12" (w/1" EGR adapter #8053), see A/B Measurements. Port exit dimensions: .96" x 1.74". |
| Ford 351 Windsor V8 |
|
PERFORMER 351-W (idle-5500 rpm) Designed for street 351 c.i.d. Ford Windsor V8s. #2181 is stock replacement/street legal part for 351-W V8s with OEM carburetor; 1969-72 (1973 non-CA); except stock equipped EGR. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, see note at the bottom of this page. |
 |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 2181 | Performer 351-W (non-EGR) | $209.99 |
| Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1491 or #1844 & #1846 |
| Installation Notes: Use 12-bolt intake gasket set (Edelbrock #7220 recommended). Van installations use OEM Ford "van" gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Choke block-off cover plate #8981 included. Manifold height: A-3.40", B-4.75" see A/B Measurements. Port exit dimensions: 1.10" x 1.80". |
| Ford 351-M/400 V8 |
|
PERFORMER
400 NON-EGR (idle-5500 rpm) Designed for 400 c.i.d. Ford V8s produced from 1971 to 1982 with 2V Cleveland heads and 351-M V8s produced from 1975 to 1982. Will not fit 1974 and earlier 351-C V8s. Valley width measures 8-17/32". |
 |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 2171 | Performer 400 (non-EGR) | $229.99 |
| Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1493 or #1844 & #1847 |
| Installation Notes: Carburetor flange plate #2732 is included. Recommended intake gasket: Fel-Pro #MS96020. Manifold height: A-3.60", B-4.75" see A/B Measurements. Port exit dimensions: 1.24" x 1.70". |
| Ford 351-M/400 V8 |
| PERFORMER
400 EGR (idle-5500 rpm) Designed for 351-M/400 Fords in one of the three following configurations: 1) OEM 2V carb and EGR system with supplied 2V EGR spacer; 2) 4V EGR system with either an Edelbrock #8053 4V EGR spacer, or an Edelbrock #8017 and Ford #E4ZZ9A-589E 4V EGR spacer; 3) For off-highway use, non-EGR 4V system with an Edelbrock #8714 adapter. Performer 400 EGR manifold #3771 is a stock replacement/street legal part for 351-M/400 2V V8s; 1974-80. |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 3771 | Performer 400 EGR (2V or 4V carburetor) | $274.99 |
| Carburetor Recommendations: OEM 2-bbl. Off-highway, non-EGR 4V: Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1493 or #1844 & #1847 |
| Installation Notes: For non-EGR, off-road applications, use #8714 4V spacer. Intake gasket: Fel-Pro #MS96020. Replacement EGR plate gaskets: #3896 & #3897. Manifold ht: A-3.60", B-4.75" (without EGR plates installed) see A/B Measurements. Port exit dimensions: 1.16" x 1.66". |
| Ford 351 Cleveland V8 |
| PERFORMER
351-4V & 351-2V (idle-5500 rpm) Performer 351-4V is designed for street 351-C and Boss 351 Fords that came stock with 4V carb and heads. Performer 351-2V is designed for street 351-C and accepts 4V carb, however it's designed to improve the performance of engines that came stock with 2V carb and heads. Neither manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. Valley width measures 6-31/32". |
 |
| Part No. | Description | RJay's Price | Buy It! |
| 2665 | Performer 351-4V (non-EGR) | $214.99 | |
| 2750 | Performer 351-2V (non-EGR) | $232.99 |
| Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see Carbs & Accessories), for auto. trans. use our #1483 & #1493 or #1844 & #1847 |
| Installation Notes: Choke block-off plate included with Performer 351-2V #2750. Recommended intake gasket: Fel-Pro #1228 (for #2665) or #1240 (for #2750). Manifold height: A-3.50", B-4.30 see A/B Measurements. Port exit dimensions: #2665 - 1.37" x 2.15"; #2750 - 1.30" x 1.86". |
| Related Parts You May Want to Check Out: |
| Lokar Throttle Cables |
| Edelbrock Caruretors |
| Edelbrock Elite Series Valve Covers |
| Billet Specialties Valve Covers |
| Billet Specialties Air Cleaners |
| Mr Gasket & K&N Air Cleaners |
 |
||||||||||
530
Daniels Rd / Cuba, MO 65453
All Materials Copyright © Flying A Motorsports, Inc. Reproduction of any material prohibited without written permission. |
| |
| top |