Performer Carburetors

500 cfm, Manual or Electric Choke

Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford and dual-quad applications such as Edelbrock C-26, F-28 and Street Tunnel Ram. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Includes both timed and full vacuum ports. Comes with: Metering Jets - Primary .086, Secondary .095; Metering Rods - .065 x .052; Step-Up Spring - orange (5" Hg).

Part No.

Description

RJay's

Buy It!

EDE1403

500 cfm, square-flange, electric choke (non-EGR)

$297.00

EDE1404

500 cfm, square-flange, manual choke (non-EGR)

$247.00

600 cfm, Street Legal, Electric Choke

CALIBRATED FOR FUEL ECONOMY
50-state street legal for all 1980 and earlier General Motors V8s (E.O. #D-215-10). Includes timed vacuum ports, EGR and fuel vapor outlet. Not for computer-controlled engines. Comes with the following jets, rods and springs: Metering Jets - Primary .098, Secondary .095; Metering Rods - .073 x .047; Step-Up Spring - orange (5" Hg). Includes carb studs and hardware.

Part No.

Description

RJay's

Buy It!

EDE1400

600 cfm, square-flange, electric choke, (EGR)

$292.00

600 cfm, Manual Choke

CALIBRATED FOR PERFORMANCE

Designed for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets - Primary .100, Secondary .095; Metering Rods - .070 x .047; Step-Up Spring - orange (5" Hg).

Part No.

Description

RJay's

Buy It!

EDE1405

600 cfm, square-flange, manual choke (non-EGR)

$252.00

EDE1478

Electric choke kit

$53.95

600 cfm, Electric Choke

CALIBRATED FOR FUEL ECONOMY

Designed for small-block and small displacement big-block engines, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intakes. Match with a Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring - yellow (4" Hg).

Part No.

Description

RJay's

Buy It!

EDE1406

600 cfm, square-flange, electric choke (non-EGR)

$260.00

750 cfm, Manual Choke

CALIBRATED FOR PERFORMANCE

Designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring - orange (5" Hg).

Part No.

Description

RJay's

Buy It!

EDE1407

750 cfm, square-flange, manual choke (non-EGR)

$257.00

EDE1478

Electric choke kit

$53.95

750 cfm, Electric Choke

CALIBRATED FOR FUEL ECONOMY

Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds and other brands of similar design, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Provides excellent fuel economy when used on 454 c.i.d. Chevy and 460 c.i.d. Ford with Performer manifold. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .110, Secondary .107; Metering Rods - .075 x .047; Step-Up Spring - orange (5" Hg).

Part No.

Description

RJay's

Buy It!

EDE1411

750 cfm, square-flange, electric choke (non-EGR)

$299.00

EPS 800, Manual or Electric Choke

CALIBRATED FOR PERFORMANCE
Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft/lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package. Features include a high capacity accelerator pump and an improved primary and secondary cluster design. EPS 800 has the same superior features as the rest of the Performer Series line such as out-of-the-box performance and 2-piece design. Comes with: Metering Jets - Primary .113, Secondary .101; Metering Rods - .071 x .047; Step-Up Spring - orange (5" Hg).

Part No.

Description

RJay's

Buy It!

EDE1412

800 cfm, square-bore, manual choke (non-EGR)

$310.00

EDE1413

800 cfm, square-bore, electric choke (non-EGR)

$349.00

Performer Series carburetors not compatible with Ford Automatic Overdrive transmissions (AOD).

*Not legal for sale or use on pollution controlled motor vehicles.

Related Parts You May Want to Check Out:

Lokar Throttle Cables

Edelbrock Intake Manifolds

Edelbrock Elite Series Valve Covers

Billet Specialties Valve Covers

Billet Specialties Air Cleaners

Mr Gasket & K&N Air Cleaners

7079 Hwy ZZ / Cuba, MO 65453

Monday-Friday 9:00am to 5:00pm CST / Saturday 9:00am to 12:00pm CST

Contact RJay's Speed Shop

Phones:	e-mail:
Toll Free: 1-866-885-9106	Tech/Parts Questions
Phone: 1-573-885-9106	Order Inquiries
Fax: 573-885-6456	RJay hiself

top