| Wilwood Aluminum Tandem Chamber Master Cylinder |
| Wilwood
tandem chamber master cylinders represent the latest refinements in brake
pressure actuation and fluid control. The exclusive Wilwood features incorporated
in this innovative and unique new design make it the perfect choice for
a wide range of custom manual or power brake applications. |
|
| High-pressure die casting of a premium alloy produces a high-capacity body that is lightweight, looks great, and has the durability for competition. |
| A black anodized, machined billet lid captures a pressure balanced bellows gasket with 100% sealing against moisture invasion or fluid leakage. The mounting flange is slotted to accommodate installation on bolt centers between 3.22" and 3.40". That makes it a simple bolt-on to many OE mounts including the popular Chrysler, Corvette, GM, and Ford Mustang master cylinder bolt patterns. | |
 |
The body also features two through-hole mounts on 6.40" centers for side mounting to frame members or other secure elements of the chassis. Each master cylinder is configured with full separation between the front and rear reservoir chambers and fluid outlets. There is pressure access on both sides of the piston bore for right or left hand plumbing based on mount location. |
| A total piston stroke of 1.10" is distributed at a 2:1 volume ratio between the primary and secondary chambers. A choice of either 1.00" or 1.12" bore sizes provides the necessary options to match the volume and pressure requirements of nearly any application. | |
| And for those wanting a show car look, a bright finish, media burnished version is available and guaranteed to catch the eye of the most discriminating enthusiasts. | |
| Non-Power Brake Applications Only |
| Part No. | Description / Application | RJay's | Buy It! |
| WIL260-8555 | 1.00" Bore Master Cylinder - Standard Finish | $199.00 | |
| WIL260-8555P | 1.00" Bore Master Cylinder - Bright Finish | $239.00 |
| Power and Non-Power Brake Applications |
| Part No. | Description / Application | RJay's | Buy It! |
| WIL260-8556 | 1.12" Bore Master Cylinder - Standard Finish | $199.00 | |
| WIL260-8556P | 1.12" Bore Master Cylinder - Bright Finish | $239.00 |
| Wilwood Proportioning Valve |
| Compact and lightweight forged billet aluminum construction has made Wilwood's proportioning valves the best available. Pressure adjustments range from 100-1000 PSI and provide for a maximum decrease of 57% in line pressure. This adjustment lets you fine tune the front to rear braking balance by proportionately decreasing the rear (or in some cases the front) brake line pressure. Can also be used to adjust individual front wheel braking in dirt track applications. |
 |
KNOB STYLE PROPORTIONING
VALVE: Knob with fine thread tuning provides precise pressure adjustment. Used for street rods, pro series racing and off road vehicles. |
| Part No. | Description / Application | RJay's | Buy It! |
| WIL260-8419 | Knob Style Proportioning Valve | $42.99 |
| Wilwood Residual Pressure Valves |
| These in-line pressure
valves retain a minimum brake line pressure to help eliminate excessive
pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension in the drums. |
|
WILWOOD
RESIDUAL PRESSURE VALVES: Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Ideal for drag racing, street rod and many off road applications. |
| Part No. | Description / Application | RJay's | Buy It! |
| WIL260-1874 | 2 lb Residual Pressure Valve (BLUE) | $18.99 | |
| WIL260-1876 | 10 lb Residual Pressure Valve (RED) | $18.99 |
| Related Parts You May Want to Check Out: |
| Wilwood Disc Brake Kits |
| Mustang II Brake Kits & Parts |
| Brake Fittings |
| Brake Lines |
 |
||||||||||
530
Daniels Rd / Cuba, MO 65453
All Materials Copyright © Flying A Motorsports, Inc. Reproduction of any material prohibited without written permission. |
| |
| top |