| BILLET ALUMINUM STEERING COLUMNS: |
 |
Billet Aluminum Steering Column Our steering column is fully machined from 6061-T6 billet aluminum. All columns feature GM wiring, emergency flasher, directionals, 5 position tilt and accept most aftermarket steering wheels. Each column is shipped with our 3-piece dress up kit which consists of a tilt lever, turn signal lever, and emergency flasher knob. The dress-up kit pieces are machined from stainless steel and aluminum. Custom lengths are available upon request with a minimum length of 26-1/2” from the end of the “Double D” spline to the top edge of the aluminum body (see diagram below). The standard stock length is 32-1/2”. Remember, when measuring the drop length of your column set up, measure from the mounting surface of the underdash to the middle of the column tube. |
| Part No. | Description / Application | RJay's Price | Buy It! |
| BSP25120 | Polished Aluminum
Steering Column - 1" Double D End 1-7/8" Diameter x 32-1/2" Overall Length |
$409.95 | |
| BSP25125 | Polished Aluminum
Steering Column - 1" - 48 Spline 1-7/8" Diameter x 32-1/2" Overall Length (Special Order Only!) |
$429.95 |
| ALUMINUM STEERING COLUMN DROPS: |
 |
Column Drops 2" Dia. Our billet swivel column drops are designed to give you the freedom to position your column for your comfort. Remember, when measuring for a column drop, always measure from the center of the hole to the mounting surface on the under side of the dash. (Supplied with 1/16" rubber insulator to fit 1-7/8" diameter columns) |
| Part No. | Description / Application | RJay's Price | Buy It! |
| 27025 | Polished Aluminum Steering Column Drop - 2" x 2-1/2" | $64.95 | |
| 27125 | Polished Aluminum Steering Column Drop - 2" x 3-1/2" | $64.95 | |
| 27225 | Polished Aluminum Steering Column Drop - 2" x 4-1/2" | $64.95 | |
| 27425 | Polished Aluminum Steering Column Drop - 2" x 5-1/2" | $64.95 |
|
Column Drops 2-1/4" Dia. Our billet swivel column drops are designed to give you the freedom to position your column for your comfort. Remember, when measuring for a column drop, always measure from the center of the hole to the mounting surface on the under side of the dash. |
| Part No. | Description / Application | RJay's Price | Buy It! |
| 26525 | Polished Aluminum Column Drop - 2-1/4" x 2-1/2" | $64.95 | |
| 26625 | Polished Aluminum Column Drop - 2-1/4" x 3-1/2" | $64.95 | |
| 26725 | Polished Aluminum Column Drop - 2-1/4" x 4-1/2" | $64.95 | |
| 26825 | Polished Aluminum Column Drop - 2-1/4" x 5-1/2" | $64.95 | |
| 26925 | Polished Aluminum Column Drop - 2-1/4" x 7-1/2" | $64.95 |
 |
Column Drops GM 2-3/8" Dia. Our billet swivel column drops are designed to give you the freedom to position your column for your comfort. 2-3/8" column drops are relieved for GM ignition rod and wiring. Remember, when measuring for a column drop, always measure from the center of the hole to the mounting surface on the under side of the dash. |
| Part No. | Description / Application | RJay's Price | Buy It! |
| 28025 | Polished Aluminum Column Drop - GM x 2-1/2" | $64.95 | |
| 28125 | Polished Aluminum Column Drop - GM x 3-1/2" | $64.95 | |
| 28225 | Polished Aluminum Column Drop - GM x 4-1/2" | $64.95 | |
| 28325 | Polished Aluminum Column Drop - GM x 5-1/2" | $64.95 | |
| 28525 | Polished Aluminum Column Drop - GM x 7-1/2" | $64.95 |
| LOWER SWIVEL COLUMN MOUNTS: |
|
Lower Swivel Column Mounts Billet Specialties lower swivel column mounts not only dress up the underdash area, but stabilize your steering column and compensate for misalignment during installation. Once your column is in place, just tighten the set screw. Use the 1-7/8” I.D. for our Billet Specialties Column.Outer diameter is 4" on either part number. |
| Part No. | Description / Application | RJay's Price | Buy It! |
| 27920 | Lower Column Mount; 1-7/8" ID | $69.95 | |
| 27925 | Lower Column Mount; 2" ID | $69.95 |
 |
||||||||||
530
Daniels Rd / Cuba, MO 65453
All Materials Copyright © Flying A Motorsports, Inc. Reproduction of any material prohibited without written permission. |
| |
| top |