COMPRESSORS
 |
The
Sanden 508 compressor provides ample capacity for even large
interiors and will enhance the appearance of your engine compartment.
All Sanden compressors are available for either R-12 or HFC-134a refrigerants. Compressor offered in three finishes: Standard - Cast aluminum Polished - Polished aluminum Black - Painted Urethane Black. RJay's also offers the 508 with three different belt configurations: V-Belt - for a multi belt system Multigroove - for a single serpentine belt Single Widegroove - for Ford flatheads |
 |
| HFC-134a PART NUMBERS |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA13-4509 | V-Belt Standard Compressor | $199.00 | |
| HRA23-4509 | V-Belt Polished Compressor | $219.00 | |
| HRA33-4509 | V-Belt Black Urethane Compressor | $239.00 | |
| HRA43-4509 | V-Belt Chrome Compressor* | $279.00 | |
| HRA13-4514 | Multigroove Standard Compressor | $199.00 | |
| HRA23-4514 | Multigroove Polished Compressor | $219.00 | |
| HRA33-4514 | Multigroove Black Urethane Compressor | $239.00 | |
| HRA43-4514 | Multigroove Chrome Compressor* | $279.00 | |
| HRA13-4530 | Single Widegroove Standard Compressor | $199.00 | |
| HRA23-4530 | Single Widegroove Polished Compressor | $239.00 | |
| HRA33-4530 | Single Widegroove Black Urethane Compressor | $239.00 | |
| HRA43-4530 | Single Widegroove Chrome Compressor* | $279.00 |
| *NOTE: CHROME COMPRESSORS CARRY A ONE YEAR WARRANTY |
| R-12 PART NUMBERS |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA12-9285 | V-Belt Standard Compressor | $199.00 | |
| HRA22-9285 | V-Belt Polished Compressor | $219.00 | |
| HRA32-9285 | V-Belt Black Urethane Compressor | $239.00 | |
| HRA42-9285 | V-Belt Chrome Compressor* | $279.00 | |
| HRA12-9537 | Multigroove Standard Compressor | $199.00 | |
| HRA22-9537 | Multigroove Polished Compressor | $219.00 | |
| HRA32-9537 | Multigroove Black Urethane Compressor | $239.00 | |
| HRA42-9537 | Multigroove Chrome Compressor* | $219.00 | |
| HRA12-9514 | Single Widegroove Standard Compressor | $199.00 | |
| HRA22-9514 | Single Widegroove Polished Compressor | $239.00 | |
| HRA32-9514 | Single Widegroove Black Urethane Compressor | $239.00 | |
| HRA42-9514 | Single Widegroove Chrome Compressor* | $219.00 |
| *Note: Chrome Compressors Carry No Warranty |
 |
REAR
EXIT COMPRESSORS For tight engine compartments, a rear exit compressor can make hose routing much easier. Rear ports accept #8 and #10 standard fittings. |
| HFC-134a PART NUMBERS |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA13-4536 | V-Belt Rear Exit Standard Compressor | $199.00 | |
| HRA23-4536 | V-Belt Rear Exit Polished Compressor | $219.00 | |
| HRA33-4536 | V-Belt Rear Exit Black Urethane Compressor | $239.00 | |
| HRA43-4536 | V-Belt Rear Exit Chrome Compressor* | $279.00 | |
| HRA13-4523 | Multigroove Rear Exit Standard Compressor | $199.00 | |
| HRA23-4523 | Multigroove Rear Exit Polished Compressor | $219.00 | |
| HRA33-4523 | Multigroove Rear Exit Black Urethane Compressor | $239.00 | |
| HRA43-4523 | Multigroove Rear Exit Chrome Compressor* | $279.00 |
| COMPRESSOR ACCESSORIES |
 |
Clutch
Covers Available polished or chrome, with or without holes. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA43-6202 | Clutch Cover - Polished Smooth | $40.00 | |
| HRA43-6203 | Clutch Cover - Polished with Holes | $40.00 | |
| HRA43-6204 | Clutch Cover - Chrome Smooth | $60.00 | |
| HRA43-6205 | Clutch Cover - Chrome with Holes | $60.00 |
 |
 Polished
Aluminum Pulley Cover Now available for driver side! |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA85-0001 | Polished Aluminum Pulley Cover - Passenger Side | $40.00 | |
| HRA85-0010 | Polished Aluminum Pulley Cover - Driver Side | $40.00 |
 |
Compressor
Hardlines These lines have been redesigned to route your hose connections even closer to the lower passenger side of your compressor. 134a lines include service ports. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA05-0811 | Compressor Hardlines | $40.00 |
 |
Compressor
Bolt Cover Kit Clean up the looks of your polished Sanden 508 Compressor with the new Compressor Dress Up Kit from Hot Rod Air, Inc. This 6 piece kit covers all bolt heads on the compressor body with polished aluminum caps providing a high tech look. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA85-0002 | Compressor Bolt Cover Kit | $40.00 |
 |
Polished
Aluminum Service Port Caps Available in Bullet or Hex Head design. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA05-1542 | Bullet Style Service Port Caps(set) | $19.95 |
 |
GM
Adaptor Plates Now you can use the stock GM compressor with your Hot Rod Air system with these new GM Adaptor Plates. These plates bolt to the back of your GM compressor and provide two O-Ring connections for your hoses. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA05-8001 | GM Compressor Adaptor Plate (Inline Ports) | $40.00 | |
| HRA05-8002 | GM Compressor Adaptor Plate (Offset Ports) | $40.00 |
 |
Ford
Adaptor Plate Now you can use the stock Ford compressor with your Hot Rod Air system with this new Ford Adaptor Plate. |
| Part No. | Description / Application | RJay's | Buy It! |
| HRA05-8003 | Ford Compressor Adaptor Plate | $40.00 |
| Compressor Tech Tips |
 |
Amperage
Requirement: 30 Amps Clutch Rotation: Clockwise/Counterclockwise Refrigerant Oil: Sanden SP-20 (PAG) All new compressors come fully serviced with oil. |
| Compressor Mounting Angles |
Sanden
recomends 7.2 +/- .5 oz of PAG/SP 20 oil in their HFC-134a compressors.
Drain compressor overnight before filling to ensure proper oil level,
For more information, Please contact our technical staff at (866) 885-9106. |
 |
||||||||||
7079
Hwy ZZ / Cuba, MO 65453
All Materials Copyright © 1999-2006 RJay's Performance Center, LLC Reproduction of any material prohibited without written permission. Contact website owner: RJay's Webmaster |
| |
| top |